Clear Arp - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

clear arp

clear [ ip ] arp [ vrf vrfName ] { ipAddress interfaceType interfaceSpecifier | * }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Clears entries from the ARP cache. There is no no version.
Description
Options
Privileged Exec
Mode
vrfName Name of the VRF; string of 1–32 alphanumeric characters
ipAddress IP address in 32-bit dotted-decimal format of the entry to be cleared
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
* Clears all dynamic ARP entries
Chapter 4: C Commands
361
clear arp