Clear Arp - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
clear arp
Syntax
Release Information
Description
Options
Mode
358
clear [ ip ] arp [ vrf vrfName ] { ipAddress interfaceType interfaceSpecifier | * }
Command introduced before JunosE Release 7.1.0.
Clears entries from the ARP cache. There is no no version.
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
ipAddress—IP address in 32-bit dotted-decimal format of the entry to be cleared
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
*—Clears all dynamic ARP entries
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers