Baseline Path Interface Sonet - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

baseline path interface sonet

baseline path interface sonet interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for SONET/SDH statistics at the path layer. The router
Description
implements the baseline by reading and storing the MIB statistics at the time the
baseline is set and then subtracting this baseline whenever baseline-relative statistics
are retrieved. There is no no version.
Options
Privileged Exec
Mode
260
baseline path interface sonet
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5