Baseline Path Interface Sonet - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
baseline path interface sonet
Syntax
Release Information
Description
Options
Mode
258
baseline path interface sonet interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for SONET/SDH statistics at the path layer. The router
implements the baseline by reading and storing the MIB statistics at the time the baseline
is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no no version.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers