Monitoring Atm Martini Cell Packing Timers For Layer 2 Services Over Mpls; Monitoring Atm Subinterfaces For Layer 2 Services Over Mpls; Table 103: Show Atm Mcpt-Timers Output Fields - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

For e series broadband services routers - bgp and mpls configuration
Table of Contents

Advertisement

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring ATM Martini Cell Packing Timers for Layer 2 Services over MPLS

Purpose
Action
Meaning
Related Topics

Monitoring ATM Subinterfaces for Layer 2 Services over MPLS

Purpose
Action
562
Issue the baseline mpls interface command:
host1#baseline mpls interface
baseline mpls interface
Display the current systemwide values configured on the router for the three ATM Martini
cell packing timers.
The ATM Martini cell packing timers define the time threshold that the router uses to
collect and concatenate ATM cells in a single VCC cell relay–encapsulated packet.
To display ATM Martini cell packing timers:
host1(config)#show atm mcpt-timers
ATM Martini cell aggregation timers:
Timer1: 1500microseconds
Timer2: 2500microseconds
Timer3: 3500microseconds
Table 103 on page 562 lists the show atm mcpt-timers command output fields

Table 103: show atm mcpt-timers Output Fields

Field Name
Timer1
Timer2
Timer3
show atm mcpt-timers
Display the current state of all specified ATM subinterfaces.
To display the current state of all ATM subinterfaces:
host1#show atm subinterface
Interface
ATM-Prot VCD VPI VCI Type Encap MTU
----------- -------- --- --- --- ---- ----- ---- ------ -------
ATM 2/0.100 ATM/MPLS 100
ATM 2/0.101 ATM/MPLS 101
ATM 2/0.200 RFC-1483 200
ATM 2/0.201 RFC-1483 201
4 interface(s) found
To display the current state of a specific ATM subinterface:
host1#show atm subinterface atm 2/0.100
Field Description
Value in microseconds for the first ATM Martini cell packing timer
Value in microseconds for the second ATM Martini cell packing timer
Value in microseconds for the third ATM Martini cell packing timer
0 100 PVC
AAL0
9180 up
0 101 PVC
AAL5
9180 up
0 200 PVC
SNAP
9180 up
0 201 PVC
SNAP
9180 up
Circuit
Status Address
--
--
--
--
Interface
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents