Table of Contents
Advertisement
JUNOSe 11.0.x Command Reference Guide A to M
area virtual-link retransmit-interval
[ no ] area { areaId | areaIdInt } virtual-link ipAddress retransmit-interval
Syntax
retransmInterval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines an OSPF virtual link and the time between link-state advertisement
Description
retransmissions for the adjacency belonging to the virtual link. The no version
removes the virtual link's retransmit interval.
Options
Router Configuration
Mode
140
area virtual-link retransmit-interval
areaId OSPF area ID in IP address format.
areaIdInt OSPF area ID as a decimal value in the range 0–4294967295
ipAddress IP address of the virtual link neighbor
retransmInterval LSA retransmit interval; an integer in the range 0–3600
seconds; default value is 5 seconds
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 and is the answer not in the manual?
Questions and answers