Area Virtual-Link Retransmit-Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
area virtual-link retransmit-interval
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] area { areaId | areaIdInt } virtual-link ipAddress retransmit-interval retransmInterval
Command introduced before JunosE Release 7.1.0.
Defines an OSPF virtual link and the time between link-state advertisement
retransmissions for the adjacency belonging to the virtual link. The no version removes
the virtual link's retransmit interval.
areaId—OSPF area ID in IP address format.
areaIdInt—OSPF area ID as a decimal value in the range 0–4294967295
ipAddress—IP address of the virtual link neighbor
retransmInterval—LSA retransmit interval; an integer in the range 0–3600 seconds;
default value is 5 seconds
Router Configuration
Chapter 2: A Commands
139
Advertisement
Table of Contents
