Write Backed-Up Parameters To The Drive - YASKAWA GA800 Programming Manual

6.
Push or
The keypad shows "End" when the backup procedure completes successfully.
◆

Write Backed-up Parameters to the Drive

You can back up parameters on the keypad and write them to different drives.
Note:
• Always stop the drive before you start to restore the parameter backups.
• The drive rejects Run commands while it is restoring parameters.
1.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
2.
Push (Menu).
3.
Push or
4.
Push or
5.
Push or
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
to select a memory location, then push
, push
to select [Parameter Backup/Restore], then push
to select the item to restore, then push
to select [Restore (keypad → drive)], then push
.
(Back), and then push
.
.
.
3.4 Keypad Operation
to show [Home].
3
567