Version
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage
The following describes the show ip ospf process-id database opaque-
Information
area command shown in the following example.
Item
LS Age
Options
LS Type
Link State ID
Advertising Router
Checksum
Length
Opaque Type
Opaque ID
Example
Dell>show ip ospf 1 database opaque-area
LS age: 1133
Options: (No TOS-capability, No DC, E)
LS type: Type-10 Opaque Link Area
Link State ID: 1.0.0.1
Advertising Router: 10.16.1.160
LS Seq Number: 0x80000416
1310
Description
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The
following options can be found in this item:
•
TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
•
DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
•
E or No E is displayed on whether the originating router
can accept AS External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Identifies the advertising router's ID.
Displays the Fletcher checksum of the LSA's complete
contents.
Displays the length in bytes of the LSA.
Displays the Opaque type field (the first 8 bits of the Link
State ID).
Displays the Opaque type-specific ID (the remaining 24 bits
of the Link State ID).
OSPF Router with ID (3.3.3.3) (Process ID 1)
Type-10 Opaque Link Area (Area 0)
Open Shortest Path First (OSPFv2 and OSPFv3)