Ip Ospf Authentication-Key - Dell Z9500 Command Reference Manual

Version
6.1.1.1

ip ospf authentication-key

Enable authentication and set an authentication key on OSPF traffic on an interface.
Z9500
Syntax
ip ospf authentication-key [encryption-type] key
To delete an authentication key, use the no ip ospf authentication-key
command.
Parameters
encryption-
type
key
Defaults Not configured.
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage All neighboring routers in the same network must use the same password to
Information exchange OSPF information.
1276
Description
Introduced on the E-Series.
(OPTIONAL) Enter 7 to encrypt the key.
Enter an eight-character string. Strings longer than eight
characters are truncated.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)