Dell Z9500 Command Reference Manual page 1041

interface
interface
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.11.1
8.3.7.1
Example
Dell#
IPv6 Address
Hardware Address
---------------------------------------------------------------
-----------------------------------------------
100::1
00:00:00:00:00:22
fe80::200:ff:fe00:22
00:00:00:00:00:22
500::1
00:01:e8:17:5c:af
fe80::200:ff:fe00:17
00:00:00:00:00:29
900::1
00:01:e8:17:5c:b1
400::1
IPv6 Basics
Enter the keyword interface then the interface type and
slot/port or number information:
• For a port channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
EXEC
EXEC Privilege
Description
Added support for VRF. Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
show ipv6 neighbors
State
DELAY
STALE
REACH
REACH
STALE
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
Interface
Te 1/12
Te 1/12
Te 1/13
Te 1/14
Po 23
Expires(min)
VLAN CPU
0.03
- CP
232
- CP
0.60
- CP
232
- CP
0.60
- CP
0.60
1041