Logging Console - Dell Z9500 Command Reference Manual

Related
clear logging
Commands
default logging buffered
setting.
show logging
buffer.

logging console

Specify which messages are logged to the console.
Z9500
Syntax
logging console [level]
To return to the default values, use the default logging console command.
To disable logging to the console, use the no logging console command.
Parameters
level
Defaults level = 7; size = debugging
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Related
clear logging
Commands
Simple Network Management Protocol (SNMP) and Syslog
— clears the logging buffer.
— returns the logging buffered parameters to the default
— displays the logging setting and system messages in the internal
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the
following parameters: emergencies, alerts, critical,
errors, warnings, notifications, informational, or
debugging. The default is 7 or debugging.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— clears the logging buffer.
1735