Switchport Mode Private-Vlan - Dell Z9500 Command Reference Manual

Primary
Isolated
Community : 20
Usage Note that if the VLAN ID you enter is a primary VLAN, the entire private VLAN
Information output is displayed, as shown below. If the VLAN ID is a secondary VLAN, only its
primary VLAN and secondary VLAN properties are displayed, as shown in the
second Example below.
Example
Dell# show vlan private-vlan 10
Primary Secondary Type
------- --------- --------- -------------------
10
Example
Dell#show vlan private-vlan 102
Primary Secondary Type
------- --------- --------- --------------------
10
Related
private-vlan mode
Commands
or primary.
show interfaces private-vlan

switchport mode private-vlan

switchport mode private-vlan
Set PVLAN mode of the selected port.
Z9500
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode
private-vlan command.
Parameters
host
promiscuous
trunk
1454
: 10
: 30
primary
102 isolated
101 community Yes
Primary
102 Isolated Yes
– sets the mode of the selected VLAN to community, isolated,
– displays type and status of PVLAN interfaces.
– sets PVLAN mode of the selected port.
Enter the keyword host to configure the selected port or
port channel as an isolated interface in a PVLAN.
Enter the keyword promiscuous to configure the selected
port or port channel as an promiscuous interface.
Enter the keyword trunk to configure the selected port or
port channel as a trunk port in a PVLAN.
Active Ports
Yes Te 2/1,3
Yes Te 0/4
Te 2/7-10
Active Ports
Yes Po 1
Te 0/2
Te 0/4
Private VLAN (PVLAN)