Default Logging Monitor - Dell Z9500 Command Reference Manual

Version
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Related logging console
Commands

default logging monitor

Return to the default settings for messages logged to the terminal.
Z9500
Syntax
default logging monitor
Defaults level = 7 or debugging
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Related
logging monitor
Commands
terminal monitor
Simple Network Management Protocol (SNMP) and Syslog
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— sets the logging console parameters.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— sets the logging monitor parameters.
— sends system messages to the terminal/monitor.
1731