Default-Metric - Dell Z9500 Command Reference Manual

default-metric

Change the default metric for routes. To ensure that all redistributed routes use the same metric value,
use this command with the redistribute command.
Z9500
Syntax
default-metric number
To return the default metric to the original values, use the no default-metric
command.
Parameters
number
Defaults 1
Command ROUTER RIP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
6.2.1.1
Usage This command ensures that route information being redistributed is converted to
Information the same metric value.
Related redistribute
Commands
1536
Specify a number. The range is from 1 to 16. The default is 1.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— allows you to redistribute routes learned by other methods.
Routing Information Protocol (RIP)