Dell Z9500 Command Reference Manual page 1211

Version
9.7(0.0)
9.2(1.0)
9.0.2.0
9.2.(0.0)
8.4.1.1
8.3.19.0
8.3.7.0
7.6.1.0
7.5.1.0
E-Series legacy
command
Example
Dell#show ip mroute static
(Static)
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change:
00:00:23
Example
Dell#show ip mroute snooping
(Snooping)
IPv4 Multicast Snooping Table
(*, 224.0.0.0), uptime 17:46:23
(*, 225.1.2.1), uptime 00:04:16
(165.87.1.7, 225.1.2.1), uptime 00:03:17
Example (VLT)
Dell#show ip mroute vlt
IP Multicast Routing Table
Flags: S – Synced
(*, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Multicast
Description
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Added support for keyword vlt to the Z9000, S4810, and
S4820T.
Support for the keyword snooping and the optional vlan
vlan-id, group-address, and source-address
parameters were added on E-Series ExaScale.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Incoming vlan: Vlan 2
Outgoing interface list:
TenGigabitEthernet 4/13
Incoming vlan: Vlan 2
Outgoing interface list:
TenGigabitEthernet 4/11
TenGigabitEthernet 4/13
Incoming vlan: Vlan 2
Outgoing interface list:
TenGigabitEthernet 4/11
TenGigabitEthernet 4/13
TenGigabitEthernet 4/20
1211