Aaa Authentication Login - Dell Z9500 Command Reference Manual

aaa authentication login

Configure AAA Authentication method lists for user access to EXEC mode (Enable log-in).
Z9500
Syntax
aaa authentication login {method-list-name | default} method
[... method4]
To return to the default setting, use the no aaa authentication login
{method-list-name | default} command.
Parameters
method-list-
name
default
method
... method4
Defaults Not configured (that is, no authentication is performed).
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1612
Enter a text string (up to 16 characters long) as the name of a
user-configured method list that can be applied to different
lines.
Enter the keyword default to specify that the method list
specified is the default method for all terminal lines.
Enter one of the following methods:
• enable: use the password the enable password
command defines in CONFIGURATION mode. Not
available if role-only is in use.
• line: use the password the password command defines
in LINE mode. Not available if role-only is in use.
• local: use the password for the userid contained in the
local password database.
• none: no authentication. Not available if role-only is in
use.
• radius: use the RADIUS servers configured with the
radius-server host command.
• tacacs+: use the TACACS+ servers configured with the
tacacs-server host command.
(OPTIONAL) Enter up to four additional methods. In the
event of a "no response" from the first method, the system
applies the next configured method (up to four configured
methods).
Security