Clear Dampening - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

Dell#clear counters

Clear counters on all interfaces [confirm]

mac learning-limit

configured or disallow station move on learned MACs.

show interfaces

clear dampening

Clear the dampening counters on all the interfaces or just the specified interface.

clear dampening [interface]

Without an interface specified, the command clears all interface dampening

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

— allows aging of MACs even though a learning-limit is

— displays information on the interfaces.

(OPTIONAL) Enter any of the following keywords and slot/

port or number to clear counters from a specified interface:

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

Introduced on the S6000-ON.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Introduced on the E-Series ExaScale.