Dell Z9500 Command Reference Manual page 1444

Defaults none
Command MONITOR SESSION (conf-mon- sess-session-ID)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.8(0.0)
9.7(0.0)
9.5(0.1)
9.4.0.0
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.1.1.0
7.7.1.0
7.5.1.0
7.4.1.0
Example
Dell# monitor session 0
source Port-channel 10 destination TenGigabitEthernet 1/33
direction tx
1444
Description
Added the any parameter.
Introduced on the S6000-ON.
Introduced on the Z9500.
Added support for Source and destination.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Port Monitoring