Dell Z9500 Command Reference Manual page 1455

Defaults Disabled.
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Usage
The assignment of the various PVLAN port types to port and port channel (LAG)
Information
interfaces is shown in the following example.
Example
Dell#conf
Dell(conf)#interface TenGigabitEthernet 2/1
Dell(conf-if-te-2/1)#switchport mode private-vlan promiscuous
Dell(conf)#interface TenGigabitEthernet 2/2
Dell(conf-if-te-2/2)#switchport mode private-vlan host
Dell(conf)#interface TenGigabitEthernet 2/3
Dell(conf-if-te-2/3)#switchport mode private-vlan trunk
Dell(conf)#interface port-channel 10
Dell(conf-if-te-2/3)#switchport mode private-vlan promiscuous
Related
private-vlan mode
Commands
or primary.
private-vlan mapping secondary-vlan
primary and then associates the secondary VLANs to it.
show interfaces private-vlan
Private VLAN (PVLAN)
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
— sets the mode of the selected VLAN to community, isolated,
— sets the mode of the selected VLAN to
— displays type and status of PVLAN interfaces.
1455