Debug Isis Update-Packets - Dell Z9500 Command Reference Manual

Version
6.3.1.0

debug isis update-packets

Enable debugging on link state PDUs (LSPs) that a router detects.
Z9500
Syntax
debug isis update-packets [interface]
To turn off debugging, use the no debug isis update-packets
[interface] command.
Parameters
interface
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.2(0.0)
8.3.19.0
8.3.12.0
6.3.1.0
1066
Description
Introduced.
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a VLAN, enter the keyword vlan then a number from
1 to 4094.
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced.
Intermediate System to Intermediate System (IS-IS)