Dell Z9500 Command Reference Manual page 1260

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.8.0
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage The following describes the debug ip ospf command shown in the Example
Information
below.
Field
8:14
OSPF
v:
t:
l:
rid:
aid:
chk:
aut:
1260
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added the database-timer rate-limit option for the
S4810.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the time stamp.
Displays the OSPF process ID: instance ID.
Displays the OSPF version. The system supports version 2
only.
Displays the type of packet sent:
• 1 - Hello packet
• 2 - database description
• 3 - link state request
• 4 - link state update
• 5 - link state acknowledgement
Displays the packet length.
Displays the OSPF router ID.
Displays the Autonomous System ID.
Displays the OSPF checksum.
States if OSPF authentication is configured. One of the
following is listed:
• 0 - no authentication configured
• 1 - simple authentication configured using the ip ospf
authentication-key command
• 2 - MD5 authentication configured using the ip ospf
message-digest-key command
Open Shortest Path First (OSPFv2 and OSPFv3)