Dell Z9500 Command Reference Manual page 1115

detail
summary
lspid
system-id
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.5(0.1)
9.2(0.2)
9.0.2.0
8.3.19.0
8.3.7.1
Usage The following describes the show isis database command shown in the
Information
following example.
Field
IS-IS Level-1/
Level-2 Link State
Database
LSPID
Intermediate System to Intermediate System (IS-IS)
(OPTIONAL) Displays the detailed link-state database
information of each LSP when specified. If not specified, a
summary displays.
(OPTIONAL) Displays the summary of link-state database
information when specified.
(OPTIONAL) Display only the specified LSP.
(OPTIONAL) Displays the link-state database for system-id.
EXEC
EXEC Privilege
Description
Added supported for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Description
Displays the IS-IS link state database for Level 1 or Level 2.
Displays the LSP identifier.
The first six octets are the System ID of the originating
router.
The first six octets are the System ID of the originating
router. The next octet is the pseudonode ID. If this byte is
not zero, the LSP describes system links. If this byte is zero
(0), the LSP describes the state of the originating router.
The designated router for a LAN creates and floods a
pseudonode LSP and describes the attached systems.
1115