Private-Vlan Mapping Secondary-Vlan - Dell Z9500 Command Reference Manual

private-vlan mapping secondary-vlan

Map secondary VLANs to the selected primary VLAN.
Z9500
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
To remove specific secondary VLANs from the configuration, use the no
private-vlan mapping secondary-vlan vlan-list command syntax.
Parameters
vlan-list
Defaults none
Command INTERFACE VLAN
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Usage The list of secondary VLANs can be:
Information
•
•
•
Related
private-vlan mode
Commands
or primary.
show interfaces private-vlan
interfaces.
show vlan private-vlan
PVLAN.
Private VLAN (PVLAN)
Enter the list of secondary VLANs to associate with the
selected primary VLAN. The list can be in comma-delimited
or hyphenated-range format, following the convention for
the range input.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Specified in comma-delimited or hyphenated-range format.
Specified with this command even before they have been created.
Amended by specifying the new secondary VLAN to be added to the list.
— sets the mode of the selected VLAN to community, isolated,
— displays the PVLANs and/or interfaces that are part of a
— displays the type and status of the PVLAN
1449