Dell Z9500 Command Reference Manual page 910

Command
Version
History
9.2.(1.0)
9.3.0.0
Usage The following table illustrates the fields displayed in the output of this command:
Information
Field
Link-bundle trigger threshold
Slot
npuUnit
hg-port-channel
Utilization (In Percent)
Alarm State
Interface
Utilization (In Percent)
Example
Dell# show hg-link-bundle-distribution slot 0 npuUnit 2 hg-
port-channel 0
hg-link-bundle trigger threshold - 60
Slot 0 npuUnit 2 hg-port-channel-0 Utilization [In Percent] -
0 Alarm State - Inactive
Interface Utilization [In Percent]
0/2:hg0
0/2:hg1
0/2:hg2
0/2:hg3
910
Description
Introduced on the Z9500 switch.
Introduced on the Z9000 switch.
Description
Percentage value of link-bundle
bandwidth that serves as the threshold
for marking a link bundle as being
overutilized, triggering link-bundle
monitoring, and generating an SNMP
alarm.
Slot number of a Z9500 line card.
Network processing unit (NPU) ID
number of a HiGig link bundle/port-
channel.
Port-channel number of a HiGig link
bundle.
Percentage of total bandwidth usage
by the traffic transmitted on the HiGig
link bundle.
Indicates whether an alarm has been
generated if uneven traffic distribution
occurs in a HiGig link bundle. Possible
values are Active and Inactive.
Member interface of the specified
HiGig link bundle/port channel in the
format:
slot-id/npu-id:hghigig-port-number
Percentage of total link-bundle
bandwidth used on each member link.
10
10
10
10
Interfaces