Ntp Server - Dell Z9500 Command Reference Manual

Version
9.6(0.0)

ntp server

Configure an NTP time-serving host.
Z9500
Syntax
ntp server {hostname | ipv4-address | ipv6-address} [key keyid]
[prefer] [version number]
Parameters
ipv4-address |
ipv6-address
hostname
key keyid
prefer
version number
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.4.1.0
7.6.1.0
7.5.1.0
System Time and Date
Description
Introduced on the S4810, S4820T, S5000, S6000, Z9000,
and Z9500.
Enter an IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X).
Enter the hostname of the server.
(OPTIONAL) Enter the keyword key and a number as the
NTP peer key. The range is from 1 to 4294967295.
(OPTIONAL) Enter the keyword prefer to indicate that this
peer has priority over other servers.
(OPTIONAL) Enter the keyword version and a number to
correspond to the NTP version used on the server. The range
is from 1 to 3.
Description
Introduced on the Z9500.
Introduced on the Z9000.
Added IPv6 support.
Introduced on the S-Series.
Introduced on the C-Series.
1795