Dell Z9500 Command Reference Manual page 1043

Parameters
ipv6-address
prefix-length
vrf vrf-name
hostname
all
bgp
connected
isis
list
ospf
rip
static
summary
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.0.0
8.3.19.0
8.3.7.0
IPv6 Basics
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
then the prefix length in the /x format. The range is from /0
to /128.
(Optional) Enter the keyword vrf followed by the name of the
VRF to display IPv6 routes corresponding to that VRF.
(OPTIONAL) View information for this IPv6 routes with Host
Name.
(OPTIONAL) View information for all IPv6 routes.
(OPTIONAL) View information for all IPv6 BGP routes.
(OPTIONAL) View only the directly connected IPv6 routes.
(OPTIONAL) View information for all IPv6 IS-IS routes.
(OPTIONAL) View the IPv6 prefix list.
(OPTIONAL) View information for all IPv6 OSPF routes.
(OPTIONAL for E-Series only) View information for all IPv6
RIP routes.
(OPTIONAL) View only routes configured by the ipv6
route command.
(OPTIONAL) View a brief list of the configured IPv6 routes.
EXEC
EXEC Privilege
Description
Added support for VRF. Introduced on S6000–ON
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
NOTE: If you do not specify this option, routes
corresponding to the default VRF are displayed.
1043