Clear Ip Pim Tib - Dell Z9500 Command Reference Manual

Version
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
Usage This command re-applies the RP mapping logic for all the groups learnt by the
Information node. Any stale information corresponding to the existing mapping configuration is
updated. As a result, the existing BSR cache and the *,G's are deleted only if these
entries are stale.

clear ip pim tib

Clear PIM tree information from the PIM database.
Z9500
Syntax
clear ip pim [vrf vrf-name] tib [group]
Parameters
vrf vrf-name
group
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.11.1
1374
Description
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to configure this setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
(OPTIONAL) Enter the multicast group address in dotted
decimal format (A.B.C.D).
Description
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
PIM-Sparse Mode (PIM-SM)