Rate-Shape - Dell Z9500 Command Reference Manual

Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage The default burst size is 100Kb. If a different value is required, you must configure
Information the burst size to the required value.
Related
rate shape
Commands
qos-policy-input

rate-shape

Shape traffic output as part of an output QoS policy.
Z9500
Syntax
rate-shape {kbps | pps} peak-rate {burst-kbps | burst-packets}
[committed {kbps | pps} committed-rate {burst-kbps | burst-
packets}]
Parameters
kbps
pps
burst-kbps
burst-packets
Defaults
Command QOS-POLICY-OUT
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
1504
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added the kbps option on the C-Series, E-Series, and S-
Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— shapes traffic output as part of the designated policy.
— creates a QoS output policy.
Enter the keyword kbps to specify the rate limit in kilobits
per second (Kbps). The range is from 0 to 40000000.
Enter the keyword pps to specify the rate limit in packets per
second (pps). The range is from .
Enter the peak rate or committed rate size in kilobits per
second. The range is from . The default is .
Enter the peak rate or committed rate size in packets per
second. The range is from . The default is .
Quality of Service (QoS)