Version
9.5(0.1)
9.3(0.0)
Usage
When a multicast source and multicast receivers are in the same VLAN, you can
Information
configure a router so that multicast traffic is switched only to the ports assigned to
a VLAN that is associated with a static multicast MAC address. However, before you
can configure a static MAC address and associate it with a VLAN used to switch
Layer 2 multicast traffic, you must first enable the router for Layer 2 multicast
switching with the ip multicast-mode l2 command.
Example
mac-address-table static 01:00:5E:01:00:01 vlan 2
(Multicast)
Te 0/2,Te 0/3
1204
Description
Introduced on the Z9500.
Added support for multicast MAC address on the MXL
platform.
output—range
Microsoft Network Load Balancing