Protocol Spanning-Tree Mstp - Dell Z9500 Command Reference Manual

Version
7.5.1.0
6.5.1.0
Usage For two MSTP switches to be within the same MSTP region, the switches must
Information share the same region name (including matching case).
Related
msti
Commands
revision

protocol spanning-tree mstp

To enable and configure the multiple spanning tree group, enter MULTIPLE SPANNING TREE mode.
Z9500
Syntax
protocol spanning-tree mstp
To disable the multiple spanning tree group, use the no protocol spanning-
tree mstp command.
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Multiple Spanning Tree Protocol (MSTP)
Description
Introduced on the C-Series.
Introduced.
— maps the VLAN(s) to an MST instance.
— assigns the revision number to the MST configuration.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1241