Ip Ssh Server - Dell Z9500 Command Reference Manual

flash://ADMIN_DIR/ssh/authorized-keys-username (where username is
the user associated with this terminal).
Related
show ip ssh rsa-authentication
Commands
ip ssh rsa-authentication (Config)

ip ssh server

Configure an SSH server. The SSH server is enabled by default.
Z9500
Syntax
ip ssh server {ciphers cipher-list} {enable | port port-number}
[kex key-exchange-algorithm] [mac hmac-algorithm] [version {1 |
2}]
To disable SSH server functions, use the no ip ssh server {ciphers
cipher-list} {enable | port port-number} [kex key-exchange-
algorithm] [mac hmac-algorithm] [version {1 | 2}] command.
Parameters
enable
ciphers cipher-
list
Security
NOTE: The no form of this command deletes the file flash://ADMIN_DIR/
ssh/ authorized-keys-username file.
NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
Enter the key word enable to start the SSH server.
Enter the keyword ciphers and then a space-delimited list
of ciphers that the SSH server supports.
The following ciphers are available.
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
•
aes256-cbc
•
aes128-ctr
•
aes192-ctr
•
aes256-ctr
The default cipher list is used.
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
— displays the RSA authorized keys.
— enables RSA authentication.
1665