default-information originate
Generates a default route into an IS-IS routing domain and controls the distribution of default
information.
Z9500
Syntax
default-information originate [always] [metric metric] [route-
map map-name]
To disable the generation of a default route into the specified IS-IS routing domain,
use the no default-information originate [always] [metric metric]
[route-map map-name] command.
Parameters
always
metric metric
route-map
map-name
Defaults
Not configured.
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
7.5.1.0
6.3.1.0
Usage
When you use this command to redistribute routes into a routing domain, the
Information
router becomes an autonomous system (AS) boundary router. An AS boundary
Intermediate System to Intermediate System (IS-IS)
(OPTIONAL) Enter the keyword always to have the default
route always advertised.
(OPTIONAL) Enter the keyword metric then a number to
assign to the route. The range is from 0 to 16777215.
(OPTIONAL) A default route the routing process generates if
the route map is satisfied.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added IPv6 ISIS support.
Introduced.
1067