Show Ip Protocols - Dell Z9500 Command Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.5.1.0
6.1.1.0
Example
Dell#show ip management-route
Destination
-----------
10.1.2.0/24
172.16.1.0/24
Dell#

show ip protocols

View information on all routing protocols enabled and active on the switch.
Z9500
Syntax
show ip protocols
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
IPv4 Routing
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Gateway
-------
ManagementEthernet 0/0
10.1.2.4
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
State
-----
Connected
Active
977