Dell Z9500 Command Reference Manual page 1632

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.4.1.0
8.3.7.0
7.7.1.0
7.6.1.0
7.5.1.0
6.2.1.0
Usage
To configure any number of RADIUS server hosts for each server host that is
Information
configured, use this command. The system searches for the RADIUS hosts in the
order they are configured in the software.
The global default values for the timeout, retransmit, and key optional
parameters are applied, unless those values are specified in the radius-server
host or other commands. To return to the global default values, if you configure
the timeout, retransmit, or key values, include those keywords when using the
no radius-server host command syntax.
Related
login authentication
Commands
radius-server key
radius-server retransmit
send information.
radius-server timeout
1632
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for IPv6.
Introduced on the S4810.
Authentication key length increased to 42 characters.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the database to be checked when a user logs in.
— sets an authentication key for RADIUS communications.
— sets the number of times the RADIUS server attempts to
— sets the time interval before the RADIUS server times out.
Security