Show Lldp Statistics - Dell Z9500 Command Reference Manual

detail
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.1.(0.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.7.1.0
7.6.1.0
7.4.1.0
Usage Omitting the keyword detail displays only the remote chassis ID, Port ID, and
Information
Dead Interval.
Example
R1(conf-if-te-1/31)#do show lldp neighbors
Loc PortID Rem
Id
--------------------------------------------------------------
Te 1/21
Te 1/31

show lldp statistics

Display the LLDP statistical information.
Z9500
Syntax
show lldp statistics
Defaults none
Link Layer Discovery Protocol (LLDP)
(OPTIONAL) Enter the keyword detail to display all the TLV
information, remote management IP addresses, timers, and
LLDP tx and rx counters.
Description
Introduced on the Z9500.
Modified output of detail parameter to display remote
management IP addresses.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Host Name
R2 TenGigabitEthernet
R3 TenGigabitEthernet
Rem Port Id Rem Chassis
2/11 00:01:e8:06:95:3e
1/11 00:01:e8:09:c2:4a
1187