Ip Ssh Key-Size - Dell Z9500 Command Reference Manual

Parameters
enable
Defaults Disabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage
If you enable this command, clients can log in without a password prompt. This
Information
command provides two levels of authentication:
•
•
Related
ip ssh pub-key-file
Commands
ip ssh rhostsfile

ip ssh key-size

Configure the size of the server-generated RSA SSHv1 key.
Z9500
Syntax
ip ssh key-size 512-869
1658
Enter the keyword enable to enable hostbased-
authentication for SSHv2 server.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
rhost-authentication is done with the file specified in the ip ssh rhostfile
command.
checking client host-keys is done with the file specified in the ip ssh pub-
key-file command.
NOTE: Administrators must specify the two files (rhosts and pub-key-file)
to configure host-based authentication.
— public keys of trusted hosts from a file.
— trusted hosts and users for rhost authentication.
Security