Match Mac Dot1P - Dell Z9500 Command Reference Manual

Defaults none
Command CLASS-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.5.1.0
7.4.1.0
Usage To access this command, enter the class-map command. After the class map is
Information
identified, you can configure the match criteria.
Related class-map
Commands

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.
Z9500
Syntax
match mac dot1p {dot1p-list}
Parameters
dot1p-list
Defaults none
Command CLASS-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
1496
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Available on the C-Series and S-Series.
Added support for the DSCP Marking option.
Introduced.
— identifies the class map.
Enter a dot1p value. The range is from 0 to 7.
Description
Introduced on the Z9500.
Quality of Service (QoS)