Show Isis Protocol - Dell Z9500 Command Reference Manual

Dell#

show isis protocol

Display IS-IS routing information.
Z9500
Syntax
show isis [vrf vrf-name] protocol
Parameters
vrf vrf-name
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.5(0.1)
9.2(0.2)
9.0.2.0
8.3.19.0
8.3.12.0
Example
The bold section identifies that Multi-Topology IS-IS is enabled.
Dell#show isis protocol
IS-IS Router: <Null Tag>
Intermediate System to Intermediate System (IS-IS)
IP Address(es): 25.1.1.3*
MAC Address: 0000.0000.0000
Hold Time: 28
Link Local Address: fe80::201:e8ff:fe00:492c
Topology: IPv4 IPv6 , Common (IPv4 IPv6 )
Adjacency being used for MTs: IPv4 IPv6
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to display IS-IS routing information corresponding to
that VRF.
EXEC
EXEC Privilege
Description
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
System Id: F100.E120.0013 IS-Type: level-1-2
Manual area address(es):
49.0000.0001
Routing for area address(es):
49.0000.0001
1123