Dell Z9500 Command Reference Manual page 1675

-v {1 | 2}
Defaults As shown in the Parameters section.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.4(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.12.0
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Dell Networking OS supports both inbound and outbound SSH sessions using IPv4
Information or IPv6 addressing. Inbound SSH supports accessing the system through the
management interface as well as through a physical Layer 3 interface.
Example
Dell#ssh 10.11.8.12 ?
-c
-l
-m
Security
(OPTIONAL) Enter the keyword -v then the SSH version 1 or
2. The default is the version from the protocol negotiation.
Description
Added support for the following ciphers and HMAC
alogorithms on the Z9000, S6000, S4820T, S4820T.
•
aes128-cbc
•
aes192-cbc
•
aes256-cbc
•
aes128-ctr
•
aes192-ctr
•
aes256-ctr
•
hmac-sha2-256
•
hmac-sha2-256-96
Added support for VRF.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for the -c and -m parameters on the S4810.
Introduced on the S4810.
Introduced on the S-Series.
Added IPv6 support. Introduced on the C-Series.
Introduced on the E-Series.
Encryption cipher to use (for v2 clients only)
User name option
HMAC algorithm to use (for v2 clients only)
1675