Show Interfaces Phy - Dell Z9500 Command Reference Manual

Version
8.5.1.0
8.1.1.0
7.6.1.0
7.5.1.0
7.4.1.0
Example
Dell# show interfaces dampening tengigabitethernet 2
Interface
Suppress
Te 2/0
250
Dell# show interfaces dampening summary
1 interface is configured with dampening. No interfaces are
currently suppressed.
Dell# show interfaces dampening detail
Interface
Operation state
Suppression state
Flap count
Penalty
Half life
Reuse threshold
Suppression threshold
Max suppression time
Time since last suppressed
Time remaining to change state to up : 0
Related
dampening
Commands
show interfaces
interface.
show interfaces configured
configuration.

show interfaces phy

Display auto-negotiation and link partner information.
Z9500
Syntax
show interfaces {tengigabitethernet | fortyGigE} slot/port phy
Parameters
{tengigabitethe
rnet |
fortyGigE}
876
Description
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
Supp Flaps
Max-Sup
State
Up 0
300
— configures dampening on an interface.
— displays information on a specific physical interface or virtual
— displays any interface with a non-default
Enter one of the keywords tengigabitethernet or
fortyGigE with slot/port information.
Penalty Half-Life
0 5
: TenGigabitEthernet 2/0
: down
: Up
: 0
: 0
: 5
: 200
: 250
: 300
: 0
Reuse
200
Interfaces