Graceful-Restart Restart-Wait - Dell Z9500 Command Reference Manual

Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.3.1.0

graceful-restart restart-wait

Enable the graceful restart maximum wait time before a restarting peer comes up.
Z9500
Syntax
graceful-restart restart-wait seconds
To return to the default, use the no graceful-restart restart-wait
command.
Parameters
seconds
Defaults 30 seconds
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
1076
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
NOTE: Set the t3 timer to adjacency on the restarting router when
implementing this command.
Enter the graceful restart time in seconds. The range is from
5 to 300 seconds. The default is 30 seconds.
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Intermediate System to Intermediate System (IS-IS)