Area Range - Dell Z9500 Command Reference Manual

default-
information-
originate
no-summary
Defaults Not configured.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1

area range

Summarize routes matching an address/mask at an area border router (ABR).
Z9500
Syntax
area area-id range ip-address mask [not-advertise]
To disable route summarization, use the no area area-id range ip-address
mask command.
Parameters
area-id
ip-address
mask
not-advertise
1254
(OPTIONAL) Allows external routing information to be
imported into the NSSA by using Type 7 default.
(OPTIONAL) Specify that no summary LSAs should be sent
into the NSSA.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
Specify an IP address in dotted decimal format.
Specify a mask for the destination prefix. Enter the full mask
(for example, 255.255.255.0).
(OPTIONAL) Enter the keywords not-advertise to set the
status to DoNotAdvertise (that is, the Type 3 summary-LSA is
Open Shortest Path First (OSPFv2 and OSPFv3)