Distribute-List In - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

The administrative distance indicates the trust value of incoming packets. A low

administrative distance indicates a high trust rate. A high value indicates a lower

trust rate. For example, a weight of 255 is interpreted that the routing information

source is not trustworthy and should be ignored.

distribute-list in

Filter network prefixes received in updates.

distribute-list prefix-list-name in [interface]

To return to the default values, use the no distribute-list prefix-list-

name in [interface] command.

prefix-list-

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Specify the prefix list to filter prefixes in routing updates.

(OPTIONAL) Identifies the interface type slot/port as one of

the following:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a SONET interface, enter the keyword sonet then the

slot/port information.

For a VLAN, enter the keyword vlan then a number from

ROUTER ISIS (for IPv4)

CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Intermediate System to Intermediate System (IS-IS)