Show Management Application Pkt-Fallback-Cntr - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

show management application pkt-fallback-cntr

Display the number of packets for each application type that have been rerouted to the default routing

table due to management port or route lookup failure.

show management application pkt—fallback-cntr

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Dell#show management application pkt-fallback-cntr

sflow-collector

Port Channel Commands

A Link Aggregation Group (LAG) is a group of links that appear to a MAC client as if they were a single link

according to IEEE 802.3ad. In the Dell Networking OS, a LAG is referred to as a Port Channel.

For the S-Series, the maximum port channel ID is 128 and the maximum members per port channel is

Because each port can be assigned to only one Port Channel, and each Port Channel must have at least

one port, some of those nominally available Port Channels might have no function because they could

have no members if there are not enough ports installed. In the S-Series, stack members can provide

those ports.

Introduced on the Z9500.

Introduced on the Z9000, S4810, and S4820T.