Show Ipv6 Cam Linecard - Dell Z9500 Command Reference Manual

show ipv6 cam linecard

Displays the IPv6 CAM entries for the specified line card and port pipe.
Z9500
Syntax
show ipv6 cam linecard slot-id port-set {0-3} [summary | ipv6–
address]
Parameters
line card slot-id
port-set
summary
ipv6-address
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0)
Version 9.0.0.0
Version
8.3.19.0
Version 8.3.7.1
Version 8.4.2.1
1030
Enter the slot ID of the line card. The range of Z9500 slot IDs
is from 0 to 2.
Enter the keyword port—set followed by the port-pipe
number. The range of Z9500 port-pipe numbers is: 0 to 2 on
line card 0; 0 to 3 on line cards 1 and 2.
(OPTIONAL) Enter the keyword summary to display a table
listing network prefixes and the total number prefixes which
can be entered into the IPv6 CAM.
Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is
from /0 to /128.
EXEC
EXEC Privilege
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
IPv6 Basics