Summary-Address - Dell Z9500 Command Reference Manual

summary-address

To advertise one external route, set the OSPF ASBR.
Z9500
Syntax
summary-address ip-address mask [not-advertise] [tag tag-value]
To disable summary address, use the no summary-address ip-address mask
command.
Parameters
ip-address
mask
not-advertise
tag tag-value
Defaults Not configured.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage
The area range command summarizes routes for the different areas.
Information
Open Shortest Path First (OSPFv2 and OSPFv3)
Specify the IP address in dotted decimal format of the
address to summarize.
Specify the mask in dotted decimal format of the address to
summarize.
(OPTIONAL) Enter the keywords not-advertise to
suppress that match the network prefix/mask pair.
(OPTIONAL) Enter the keyword tag then a value to match
on routes redistributed through a route map. The range is
from 0 to 4294967295.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1329