Defaults
none
Command
EXEC
Modes
EXEC Privilege
Command
Version
History
9.7(0.0)
9.2(1.0)
9.1.(0.0)
8.3.19.0
7.8.1.0
7.4.1.0
Example
Dell#show ipv6 ospf 3 neighbor gi 1/2
Neighbor ID
Interface
63.114.8.36
1/2
Dell#
timers spf
Set the time interval between when the switch receives a topology change and starts a shortest path first
(SPF) calculation.
Z9500
Syntax
timers spf delay holdtime
To return to the default, use the no timers spf command.
Parameters
delay
holdtime
Defaults
•
Open Shortest Path First (OSPFv2 and OSPFv3)
•
For a port channel interface, enter the keywords port-
channel then a number.
•
For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Description
Added support for VRF.
Introduced on the Z9500.
Introduced support for OSPFv3 on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
Pri
State
1
FULL/DR
Enter a number as the delay. The range is from 0 to
4294967295. The default is 5 seconds.
Enter a number as the hold time. The range is from 0 to
4294967295. The default is 10 seconds.
delay = 5 seconds
Dead Time
Interface
00:00:38
4
ID
Te
1367