Show Ip Ospf Statistics - Dell Z9500 Command Reference Manual

•
•
Example
Dell#show ip ospf 100 route
Prefix
1.1.1.1
3.3.3.3
13.0.0.0
150.150.150.0
172.30.1.0
Dell#

show ip ospf statistics

Display OSPF statistics.
Z9500
Syntax
show ip ospf [process-id | vrf vrf-name] statistics global |
[interface name {neighbor router-id}]
Parameters
process-id
vrf vrf-name
global
interface name
neighbor
router-id
Defaults none
Open Shortest Path First (OSPFv2 and OSPFv3)
The display output is sorted by prefixes; intra-area ECMP routes are not
displayed together.
For Type 2 external routes, Type 1 cost is not displayed.
Cost Nexthop
1 0.0.0.0
2 13.0.0.3
1 0.0.0.0
2 13.0.0.3
2 13.0.0.3
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Enter the keyword vrf followed by the name of the VRF to
display statistics corresponding to the OSPF process that is
tied to a specific VRF.
Enter the keyword global to display the packet counts
received on all running OSPF interfaces and packet counts
OSPF neighbors receive and transmit.
(OPTIONAL) Enter the keyword interface then one of the
following interface keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
(OPTIONAL) Enter the keyword neighbor then the
neighbor's router-id in dotted decimal format (A.B.C.D.).
Interface Area Type
Lo 0 0 Intra-Area
Te 0/47 1 Intra-Area
Te 0/47 0 Intra-Area
Te 0/47 - External
Te 0/47 1 Intra-Area
1323