Dell Z9500 Command Reference Manual page 818

Hide thumbs Also See for Z9500:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

E-Series legacy

This command displays the IGMP database, including configured entries for either

all groups on all interfaces, all groups on specific interfaces, or specific groups on

specific interfaces.

The following describes the show ip igmp groups command shown in the

following example.

Group Address

For a port channel interface, enter the keywords port-

channel then a number.

For a VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

(OPTIONAL) Enter the keyword detail to display the

IGMPv3 source information.

EXEC Privilege

Added support for VRF. Introduced on the S6000-ON.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series and C-Series.

Expanded to support the detail option.

Lists the multicast address for the IGMP group.

Lists the interface type, slot and port number.

Displays the IGMP version used.

Displays the amount of time the group has been

operational.

Displays the amount of time until the entry expires.

Internet Group Management Protocol (IGMP)